SpriteSpot.com

SpriteSpot Video Tech Tips

Static Engine Timing

This video describes how to static time your engine using a 12 volt test light. Note that the video reference 10 degrees before top dead center for MGA and MGB, but for Sprites you should use 5 degrees as a starting point (and then use the nut on the vacuum advance for fine adjustments from there).

 


Return to Index List of SpriteSpot Videos


 

This Video Courtesy of University Motors

We'd like to thank John Twist at University Motors for allowing us to share his tech videos here on SpriteSpot.

If you enjoy John's videos, please consider purchasing his "techbook".

It's $40 postpaid, and you can simply call John at 616-682-0800 with your USPS address and charge card number, or email him at johntwist@universitymotorsltd.com with your card number, expiration date and three digit code.

Safety Fast!
John H Twist
University Motors Ltd
6490 Fulton Street East
Ada, MI 49301
616 682 0800
616 682 0801 Fax
www.universitymotorsltd.com


 

Our Sponsors


Visit our
Sponsor's Page
for more
SpriteSpot.com
recommendations!

| About Us | Site Map | Privacy Policy | Contact Us | ©2004-6 SpriteSpot.com