Page 1 of 1

lack of wiper arc

PostPosted: Thu Jun 04, 2009 3:11 am
by axafrog
My windscreeb wipers have a very small wiping arc covering less than 90 degrees, I have checked the deegees on the wiper motor gear which I believe is correct at 110 degrees. The only other thing I can think of is that the wiper boxes are incorrect but I do not know what the numbers on the boxes should be. Can anyone please help.

Re: lack of wiper arc

PostPosted: Sat Jun 13, 2009 11:18 am
by admin
Here's what I have on the wiper housing:

12V (followed by an upside down "peace" symbol) 75213F
DR2 660 BN269

(The above might be OR2 and not DR2--but I think the "D" is correct)

These numbers came off a wiper box that was in a Bugeye parts car I parted out 15 years or so ago--I think it was original...hope this helps.

Please drop us a post if you need more info, or if you sort out what the issue is...