indicators

Topics related to the engines for the later MG Midget series.

indicators

Postby M55RK H » Wed Jun 12, 2013 6:52 pm

Hi, Guys wonder if you can help me out just purchased a 1978 1500cc mg midget bin converted to look like a frogeye sprite, fibreglass body, fitted new mg wiring loom everything is working fine,,ie lights ,horn wipers,but passenger side indicators not working at all drivers side is working fine,got good earth on everything,put voltage tester on indicator there is volts there but look like not strong enough,, any ideas,,cheers Mark
M55RK H
Pit Crew
 
Posts: 26
Joined: Sun Jul 25, 2010 1:36 pm

Re: indicators

Postby Charlie Tolman » Fri Jun 14, 2013 1:25 am

Fiberglass body ?
Which passenger (right) side indicator bulbs are not working correctly, front or back, or both ?
There is the possibility that the turn indicator switch is not working properly.
If both the right front and right rear bulbs are not illuminating well, then it might be the turn indicator switch.

What voltage do you measure at the "bad" bulb receptacles ?

With a jumper wire, connect full battery voltage to the bulb receptacles that are not working well. Also, run a new ground jumper wire from the battery to the receptacle housings.

Charlie T.
Charlie Tolman
Judson Supercharged
 
Posts: 1197
Joined: Wed Mar 01, 2006 10:36 am
Location: Minnesota


Return to 1500cc (Later Midget)

Who is online

Users browsing this forum: No registered users and 1 guest