BasketCases 62 948 Sprite: Project Moneypit 
TL
Another one I need to try getting a better picture of. I used the original fabric-wrapped connector hose and carefully got the red paint off the metal tube, looks OK. Just hoping the old rubber won't leak fumes or worse. The hose is available but without the fabric wrapping.
BB
Another one I need to try getting a better picture of. I used the original fabric-wrapped connector hose and carefully got the red paint off the metal tube, looks OK. Just hoping the old rubber won't leak fumes or worse. The hose is available but without the fabric wrapping.
Viewed: 1738 times.

TL
Well, what's wrong with this picture, Spridgeteers? You can't bolt in the master cylinder with the box bolted down, duh! So shortly after I proudly took this photo I was removing the box. I decided to go ahead and reassemble the master and put it all in "to stay". The reason you can't bolt in the master is that the rear bolt goes directly between the  opening in the firewall. I was just going to "rough in" the master to help with installing the brake/clutch lines.
BB
Well, what's wrong with this picture, Spridgeteers? You can't bolt in the master cylinder with the box bolted down, duh! So shortly after I proudly took this photo I was removing the box. I decided to go ahead and reassemble the master and put it all in "to stay". The reason you can't bolt in the master is that the rear bolt goes directly between the opening in the firewall. I was just going to "rough in" the master to help with installing the brake/clutch lines.
Viewed: 1673 times.

TL
000_1083.JPG
BB
000_1083.JPG
Viewed: 1652 times.

TL
000_1087.JPG
BB
000_1087.JPG
Viewed: 1536 times.

TL
000_1088.JPG
BB
000_1088.JPG
Viewed: 1622 times.

TL
000_1092.JPG
BB
000_1092.JPG
Viewed: 1956 times.

TL
000_1119.JPG
BB
000_1119.JPG
Viewed: 1643 times.

TL
000_1119.JPG
BB
000_1119.JPG
Viewed: 1556 times.

TL
000_1120.JPG
BB
000_1120.JPG
Viewed: 1598 times.

Powered by Gallery v1