Rear End Rebuild 
Got it out .... and now the hard part!
Got it out .... and now the hard part!
Viewed: 908 times.

I pulled it out with the drive shaft still connected.
I pulled it out with the drive shaft still connected.
Viewed: 964 times.

Lots of road grime! It all has to come off!
Lots of road grime! It all has to come off!
Viewed: 924 times.

This is kind of a before and after shot although I'm not done just yet but you get the idea of how it coming out. This is  the top coat I went with it's called semi-flat black that is not as shinny as semi-gloss.
This is kind of a before and after shot although I'm not done just yet but you get the idea of how it coming out. This is the top coat I went with it's called semi-flat black that is not as shinny as semi-gloss.
Viewed: 961 times.

Not ready for primer just yet. I still have some surface rust I need to remove and a little more grease.
Not ready for primer just yet. I still have some surface rust I need to remove and a little more grease.
Viewed: 1011 times.

After allot of cleaning with de-greaser and wire brushes of many types to remove not only grease but any rust. I then coated it with a black self etching primer. It will be a semi-gloss or satin black finish.
After allot of cleaning with de-greaser and wire brushes of many types to remove not only grease but any rust. I then coated it with a black self etching primer. It will be a semi-gloss or satin black finish.
Viewed: 1005 times.

Turned my engine stand to a axel housing stand! ;)
Turned my engine stand to a axel housing stand! ;)
Viewed: 958 times.

Still need to do a little more cleaning up before I put it back on but you can see it's all in really good shape.
Still need to do a little more cleaning up before I put it back on but you can see it's all in really good shape.
Viewed: 972 times.

Got the differential carrier/housing cleaned up and put on, ready for etching primer. I will be replacing the seal while I can get to it easily.
(continued on next page click below)
Got the differential carrier/housing cleaned up and put on, ready for etching primer. I will be replacing the seal while I can get to it easily.
(continued on next page click below)
Viewed: 1014 times.

Powered by Gallery v1